150mm BRENTON BOLT GALV

Pressure-treated decking boards, perfect for paths, fences and more! These versatile, homegrown softwood boards are strong, durable, and ideal for a variety of garden projects. Available for quick delivery in Bristol. - 22 x 100mm x 2.4m - Sawn finish - Pressure treated

Timber batten is a general purpose building material that has many uses for trade and DIY. - Fine-sawn finish - Pressure treated green - This batten does not comply with BS5534, we stock blue batten which does meet this grade.

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses. - Dimensions: 100 x 100mm x 2.1m - Homegrown Softwood, locally produced in the UK - Fully incised surface for improved treatment penetration - UC4 Pressure Treatment - Green

Hex head coach screw, for heavy-duty applications. Suitable for fixing into timber, can fix into brickwork and masonry with an M8 plug . M8 washers sold separately. - Length excludes 5mm bolt head - Bright Zinc Plated finish (BZP) - Pre-drill timber with 4 - 6mm pilot hole - Hex Head fits a 13mm Spanner

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts. Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature). Simply half fill the hole with water, then pour the post mix in. Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size). We offer 33% discount on post-mix when you pay & collect in store!

A light duty fixing for jobs where speed of installation is important. Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required. Installation: Pre-drill a 10mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight. Minimum fixing depth: 45mm