Personal menu

31mm STAINLESS STEEL RING CLOUT (FOR SHINGLES) 1KG

Stainless steel nails with a serrated annular ring pattern along the shank; for extra pull-out resistance. This is the correct nail for installing Cedar Shingles. The clout head firmly secures shingles and helps to prevent the nail being over-driven or pulled through the timber by strong winds. 31mm x 1.8mm Stainless Steel Ring Clout Nail 1kg pack = approximately 1500 nails 1kg of nails will install approximately 4 bundles of Cedar Shingles

Bulk Buy Discounts:

Quantity

Price

£22.99

£20.69

Availability: 14 in stock

£22.99 Inc. VAT

Qty:

i h

Description
Contact Us

Stainless steel nails with a serrated annular ring pattern along the shank; for extra pull-out resistance. This is the correct nail for installing Cedar Shingles. The clout head firmly secures shingles and helps to prevent the nail being over-driven or pulled through the timber by strong winds.

31mm x 1.8mm Stainless Steel Ring Clout Nail
1kg pack = approximately 1500 nails
1kg of nails will install approximately 4 bundles of Cedar Shingles

Your name *

Your email *

Subject: *

Enquiry *

Customers that ordered this item also bought:

1.8m X 125mm F/EDGE BOARD

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence. Feather-edge can also be fitted horizontally as a budget cladding. - 125mm Board Width - 10 boards needed per linear metre (25mm overlap) - Cut from 22 x 125mm - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge - Homegrown Spruce - Sawn finish - Pressure treated green

From £1.35 Inc. VAT

M10 FORM C WASHER

A heavy steel washer, for general use with bolts and threaded bar (studding). BZP (Bright Zinc Plate) finish. Dimensions: 2mm x 24mm Diameter 11mm Bolt Hole: To suit M10 thread

From £0.08 Inc. VAT

25 X 50mm X 4.8m TREATED BATTEN BS5534 (BLUE) Colour may vary depending on stock availability*

Graded to meet BS5534 standards, this batten is used in the building trade for roofing projects. - Stained Blue*, for grade identification purposes - Fine-sawn finish - Pressure treated - Complies with BS5534 *If blue batten is not available we occasionally have gold batten which meets the same standard

From £5.15 Inc. VAT

ARRIS RAIL BRACKET - GALV

Galvanised steel bracket for attaching 75mm triangular Arris Rail to square posts or wall plates. Minimum post/wall plate width is 45mm. Angle: 62 x 62mm (suits 75mm Arris Rail) Wings: 42 x 155mm (overall width) Length: 285mm Fixing Holes: (10x) 5mm diameter + (2x) 27mm x 6mm slots

£0.98 Inc. VAT

7.5 X 122mm MASONRY SCREW

A self-tapping Masonry Screw for brick and concrete, a popular fixing to fit window frames. An easy to use fixing that does not require plastic plugs, it has a high resistance to fire compared to nylon fixings. This screw is a friction fixing which minimises expansion stress in the base material, this allows fixing near to the edge, and gives greater loading performance than most nylon fixings. To use: pre-drill a 6mm pilot hole, use a drill or impact driver fitted with T30 bit to drive the screw in. T30 bit and white cover caps included when bought in box quantities of 100. Drill Bit Dia. - 6mm Min. Embed Depth - 45mm Head Type - T30 Torx Driver Type - Drill / Impact Driver

£0.23 Inc. VAT

M10 X 230mm CARRIAGE BOLT (+ HEX NUT)

Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber. Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened. Supplied with one standard hex nut, washers sold separately.

£1.10 Inc. VAT