Personal menu

3.5 X 16mm SUPER DRIVE SCREWS

High performance woodscrews, manufactured from high quality, low carbon steel & case hardened. The type 17 point, knurled thread and wax coating all help reduce the torque required for quick insertion. - Thread diameter: 3.5mm - Length: 16mm - Box of 200 screws - Free PZ2 driving bit included with every box

Availability: 6 in stock

£2.57 Inc. VAT

Qty:

i h

Description
Contact Us

High performance woodscrews, manufactured from high quality, low carbon steel & case hardened. Super Drive screws are intended for use in softwood, hardwood, MDF, chipboard, however they can also be used for fixing thin sheet metal & plastics.

Thread diameter: 3.5mm
Length: 16mm
Box of 200 screws
Free PZ2 driving bit included with every box

Screw features:

Type 17 point: The long sharp point pierces the timber for quick start up, even in dense hardwoods. Designed for screwing into wood, the type 17 point decreases the chance of splitting the timber which reduces the need to drill a pilot hole.
Wax coating: Super Drive screws benefit from an anti-friction coating which increases drive speed & also helps against corrosion.
Knurled thread: Grooves in the thread cut through the wood fibres quickly and enable faster insertion.
Maximum pull out resistance: The 40° single thread has been designed to give maximum pull out resistance. Super Drive screws up to & including 70mm are fully threaded.
Ribbed double countersunk head: The ribs cut a countersunk hole while the screw is being inserted, eliminating the need for a separate drill bit.
Deep recessed pozi head: The PZ2 head is less likely to cam out than a phillips head.

Your name *

Your email *

Subject: *

Enquiry *

Customers that ordered this item also bought:

2.1m X 125mm F/EDGE BOARD

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence. Feather-edge can also be fitted horizontally as a budget cladding. - 125mm Board Width - 10 boards needed per linear metre (25mm overlap) - Cut from 22 x 125mm - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge - Homegrown Spruce - Sawn finish - Pressure treated green

From £1.57 Inc. VAT

35mm U CLIP

35mm Fence Panel Clips; used to attach fence panels to wooden posts. Minimum of 4 clips needed per fence panel. - Fits fence panels up to 35mm thick - Galvanised Steel

£0.66 Inc. VAT

75 X 75mm X 2.4m SAWN TREATED POST - UC4

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses. - Dimensions: 75 x 75mm x 2.4m - Homegrown Softwood, locally produced in the UK - Sawn & incised finish - Fully incised surface for improved treatment penetration - UC4 Pressure Treatment - Green

£9.34 Inc. VAT

POST CAP FOR 75mm X 75mm POST SAWN

Fine sawn finish timber post cap for 75 x 75mm posts, pressure treated green. Protects post ends from weather and provides a smart finishing touch. - Dimensions: 23mm x 99mm x 99mm - Chamfered four sides - Pressure treated

£1.26 Inc. VAT

5'(H) X 6'(W) PREMIUM OVERLAP PANEL - TREATED

A premium quality Overlap Panel which is built to last. Height: 1524mm (5') Width: 1829mm (6') - Fully pressure treated panels - Nailed construction - Straight-edge, horizontal, sawn-finish slats - Five vertical battens on both sides (approx. 16 x 38mm) - Framed top and bottom on both sides (approx. 16 x 38mm) - Finished and protected with a top capping strip - These panels look the same from both sides, perfect for shared boundaries - Manufactured in the U.K.

£39.26 Inc. VAT

25 X 50mm X 2.4m PLANED EASED CORNERS - TREATED Length ±5mm

Planed and pressure-treated, joinery grade softwood. Build your own contemporary slatted screen fencing. Create heavy duty and decorative fencing screens, perfect for fence panels to create partitions, obscure visibility, pergola shade screens, a contemporary way to increase the height of fencing & garden walls. - Planed all round timber, with 4 eased (rounded) corners - Machined from 25 x 50mm, finished size 20 x 45mm - 2.4m long ±5mm - High quality, slow grown redwood - Pressure Treated green, 15 year Treat-Right Warranty, details in Downloads tab below - 18.2 linear metres needed to cover 1m², this is based on a 10mm gap between slats If you need help with your calculations for your screening project, please get in touch.

£2.95 Inc. VAT