50mm EURO PROFILE LOCK (KEY / KEY)

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence. Feather-edge can also be fitted horizontally as a budget cladding. - 125mm Board Width - 10 boards needed per linear metre (25mm overlap) - Cut from 22 x 125mm - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge - Homegrown Spruce - Sawn finish - Pressure treated green

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing. Drill Bit Dia. - 8mm Anchor Length - 75mm Washer Size - 10mm (M10) Min Hole Depth - 55mm Min Over Drill Depth - 15mm Min. Embed Depth - 40mm Max. Fixture Thickness - 35mm Drill Bit Dia. for clearance - 10mm (to prevent binding when tightening bolt) Head Type - Hex Head, 15mm (Across Flats) Driver Type - Impact driver, socket, spanner Max Tightening Torque - 40Nm

A heavy steel washer, for general use with bolts and threaded bar (studding). BZP (Bright Zinc Plate) finish. Dimensions: 2mm x 24mm Diameter 11mm Bolt Hole: To suit M10 thread

Galvanised steel bracket for attaching 75mm triangular Arris Rail to square posts or wall plates. Minimum post/wall plate width is 45mm. Angle: 62 x 62mm (suits 75mm Arris Rail) Wings: 42 x 155mm (overall width) Length: 285mm Fixing Holes: (10x) 5mm diameter + (2x) 27mm x 6mm slots

35mm Fence Panel Clips; used to attach fence panels to wooden posts. Minimum of 4 clips needed per fence panel. - Fits fence panels up to 35mm thick - Galvanised Steel

General purpose, pressure treated, sawn finish timber. Mainly used as fence posts but could have many other uses. - Dimensions: 100 x 100mm x 2.4m - Homegrown Softwood, locally produced in the UK - Fully incised surface for improved treatment penetration - UC4 Pressure Treatment - Green