7' TSW SOMERFIELD GATE L/H - SPECIAL ORDER

General purpose, pressure treated, sawn finish timber. Mainly used as fence or gate posts but could have many other uses. - 150 x 150mm x 2.1m Timber Post - Homegrown softwood - Fully incised surface for improved treatment penetration - UC4 Pressure Treatment - Green - 4 way weathered top (like a pyramid) - Specified length includes the weathered top

Postsaver Pro-Sleeves are a guaranteed, proven solution to ensure long-life fence posts. The sleeve’s unique dual-layer, rot prevention technology excludes all the factors required for decay to occur at the ground-line. Unlike liquid coatings and bitumen paint, Postsaver Pro Sleeves maintain a barrier to the causes of decay even when the post cracks or splits. Pro-Sleeves are proven to prevent ground rot with over 26 years of volume use in 30+ countries worldwide. Backed up with 20 years of excellent independent test data, they are easily heat applied with a blowtorch in a matter of seconds, and sleeved posts can be installed in all the usual ways. Simply fit Postsaver Pro-Sleeves and relax, safe in the knowledge that your posts are protected from rot for 20 years. Postsaver: Do it Once, Do It Right This Postsaver is suitable for use on the following post sizes: • 75 x 150mm • 100 x 125mm • 125 x 125mm • 150 x 150mm • 150mm Round

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts. Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature). Simply half fill the hole with water, then pour the post mix in. Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size). We offer 33% discount on post-mix when you pay & collect in store!

Heavy-duty galvanised hinge set for hanging a 75mm thick wooden field gate. The adjustable bottom gate fitting allows the gate to be easily levelled, this is useful if the gate or posts drop over time. Set includes: 1x 600mm (24") double strap top band 1x Adjustable bottom gate fitting 1x 19mm hook to drive 1x 19mm hook to bolt All necessary fixings Galvanised finish

Heavy-duty galvanised hinge set for hanging a 75mm thick wooden field gate. The adjustable bottom gate fitting allows the gate to be easily levelled, this is useful if the gate or posts drop over time. Set includes: 1x 600mm (24") double strap top band 1x Adjustable bottom gate fitting 2x 19mm hooks on 100 x 100mm plates All necessary fixings Galvanised finish

This galvanised set includes: spring fastener, staple catch, keep & all required fixings.

Padlockable gate catch, that stays shut once the striker has gone into the keep. Fixings included.

Throw Over Gate Loops are used to secure a pair of wooden five bar gates in the middle when in the closed position. The galvanised gate loop is fitted to the top rail of the closing gate with the included carriage bolt, for best results; drop bolts should also be fitted to secure the bottom of both gates (sold separately). Overall Length: 350mm Maximum Top Rail Width: 75mm Minimum Top Rail Depth: 75mm Galvanised finish Carriage bolt included

A Throw Over Gate Loop with lifting handle is used to secure a pair of wooden five bar gates in the middle when in the closed position. The galvanised gate loop is fitted to the top rail of the closing gate with the included carriage bolt. For best results; drop bolts should also be fitted to secure the bottom of both gates (sold separately). Overall Length: 350mm Maximum Top Rail Width: 75mm Minimum Top Rail Depth: 75mm Galvanised finish Carriage bolt included

The use of drop bolts is recommended on most gate installations as it helps to prevent the gate from twisting at the bottom. The bolt can also be used to hold the gate open if required.