85mm GALV METAL SLEEPER ANGLE BRACKET

A metal fixing plate designed for joining sleepers but could have many uses. - 80mm x 170mm x 2.0mm - 8 x 8mm diameter fixing holes - Galvanised finish

A light duty fixing for jobs where speed of installation is important. Hammer fixings work in a similar way to screws and plugs, the hammer fixing screw has a special thread that can be hammered into the plug and loosened / screwed out if required. Installation: Pre-drill a 6mm pilot hole through the item that you're fixing and into the masonry or brickwork. Lightly tap the fixing through the pilot hole with a hammer until the plug is flush. EG. if you're fixing a timber wall plate, the plug fits inside the timber as well as the wall. Once the plug is flush with the timber, hit the head of the screw harder to drive it into the plastic sleeve until tight. Minimum fixing depth: 45mm

A metal stake (pin) designed for installation of timber sleepers, use them to build raised beds and timber garden edging. The sturdy but slim profile of the pin is easy to drive into hard ground. - Total Length: 440mm - Stake Profile: 35mm x 35mm x 2.0mm - Fixing plate: 75mm x 117mm (overall) - Fixing Holes: 4 x 8mm diameter - Galvanised finish

Average coverage: 4 bags = 1m² based on 50mm depth We offer 25% discount on this product when you pay & collect in store (BS30 5JW)!

Softwood sleeper, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses. - Dimensions: 100 x 200mm x 3.0m - Sawn Finish - Homegrown Softwood, locally produced in the UK - Pressure Treated - Green

Softwood sleepers, pressure treated green, sawn finish, non-structural timber. Mainly used for landscaping projects; for raised beds and retaining walls but could have many other uses. - Dimensions: 125 x 250mm x 2.4m - Sawn Finish - Homegrown Softwood, locally produced in the UK - Pressure Treated - Green