900mm X 1800mm WELLOW GATE

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing. Drill Bit Dia. - 8mm Anchor Length - 75mm Washer Size - 10mm (M10) Min Hole Depth - 55mm Min Over Drill Depth - 15mm Min. Embed Depth - 40mm Max. Fixture Thickness - 35mm Drill Bit Dia. for clearance - 10mm (to prevent binding when tightening bolt) Head Type - Hex Head, 15mm (Across Flats) Driver Type - Impact driver, socket, spanner Max Tightening Torque - 40Nm

50mm Fence Panel Clips; used to attach fence panels to wooden posts. Minimum of 4 clips needed per fence panel. - Fits fence panels up to 50mm thick - Galvanised Steel

Concrete gravel boards slot between concrete posts to give fence panels a level surface to sit on. It is beneficial to use gravel boards if the ground is sloping; the gravel board is dug into the ground to create a level surface instead of digging in the fence panel. Raising the panel on a gravel board will help prevent rot caused by ground moisture, gravel boards also help to prevent damage to fence panels caused by lawn mowers and strimmers. - Dimensions: 45mm x 150mm x 1829mm - 20kg Each - C50 Concrete (a strong mix) - Two 5.5mm rebar set inside.

A heavy duty Close Board fence panel. Made in the U.K. using pressure treated, home grown softwoood. Height: 1676mm (5'6") Width: 1829mm (6’) - 47 x 30mm framework - ex. 22 x 125mm feather edge - Nailed construction - Pressure Treated green - Finished with planed capping

Choose our treated carcassing timber for your DIY projects! - Machined from 47 x 125mm, finished size approx. 45 x 120mm - Smooth regularised finish - Grade C24 - Good quality, slow grown softwood - Pressure treated green

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts. Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature). Simply half fill the hole with water, then pour the post mix in. Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size). We offer 33% discount on post-mix when you pay & collect in store!