BEWARE OF THE DOG SIGN - BRASS

45mm Fence Panel Clips; used to attach fence panels to wooden posts. Minimum of 4 clips needed per fence panel. - Fits fence panels up to 45mm thick - Galvanised Steel

Fine sawn finish timber post cap for 75 x 75mm posts, pressure treated green. Protects post ends from weather and provides a smart finishing touch. - Dimensions: 23mm x 99mm x 99mm - Chamfered four sides - Pressure treated

A self tapping bolt suitable for concrete, stone, brick, marble, wood and block (solid or hollow). Safe anchorage achieved without the need of high tightening forces. Can be removed and re-fixed into the same hole, providing the thread is correctly aligned. No expansion forces enables close to the edge fixing. Drill Bit Dia. - 10mm Anchor Length - 130mm Washer Size - 12mm (M12) Min Hole Depth - 70mm Min Over Drill Depth - 20mm Min. Embed Depth - 50mm Max. Fixture Thickness - 80mm Drill Bit Dia. for clearance - 12mm (to prevent binding when tightening bolt) Head Type - Hex Head, 17mm (Across Flats) Driver Type - Impact driver, socket, spanner Max Tightening Torque - 60Nm

A heavy steel washer, for general use with bolts and threaded bar (studding). BZP (Bright Zinc Plate) finish. Dimensions: 2mm x 28mm Diameter 13mm Bolt Hole: To suit M12 thread

General purpose, pressure treated, sawn finish timber. Mainly used for agricultural post & rail fencing (also known as motorway fencing) and feather-edge fencing. - Dimensions: 38 x 88mm x 4.8m - Sawn Finish - Homegrown Softwood, locally produced in the UK - Pressure Treated - Green

A mild steel plate with fixing holes used for strengthening and repairs. Pre-drilled for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance. Thickness: 2.5mm Width: 26mm Length: 150mm Fixing Holes: 5.0mm (x4)