Builders Metalwork

Galvanised mini joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for hanging 47mm wide timber - Width - 115mm (including fixing wings) - Length - 62mm - Depth - 48mm Install using 3.75 x 30mm square twist nails: 16 nail holes / hanger 1 kg square twist nails installs 21 hangers

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for 47mm wide timber - Width: 146.4mm (including fixing wings) - Length: 236.5mm - Depth: 52.1mm

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for 47mm wide timber - Width - 145mm (including fixing wings) - Length - 480mm - Depth - 65mm

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for 75mm wide timber - Width - 169mm (including fixing wings) - Height - 247mm - Depth - 55mm

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for double 45mm joists - Width: 189mm (including fixing wings) - Height: 234mm - Depth: 52mm

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for 150mm wide timber - Width - 287mm (including fixing wings) - Height - 440mm - Depth - 55mm

Galvanised Truss Clip for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for securing 47mm wide timber - Overall Width - 105mm (including fixing wings) - Length - 100mm Install using 3.75 x 30mm square twist nails 12 nail holes / truss clip 1kg square twist nails installs approx. 29 truss clips

The RR ridge rafter connector provides alignment control and correct nailing locations. The RR47 may be used with any rafter slope up to 30°. Galvanised for corrosion resistance. For back-to-back installations, the minimum width of the ridge plate is 38mm. Secure in place using 3.75 x 30mm square twisted nails. Measurements (Ref. image 3): A: 47mm B: 83mm C: 33mm D: 114mm t (Thickness): 1.2mm Fixing Holes: Header: 4mm (x4) Joist: 4mm (x4) Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below.

Metal brace for strengthening corners. Can be used for internal or external corners. Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole. Bright Zinc Plated (BZP) for corrosion resistance. Thickness: 1.5mm Width: 16mm Length: 50mm x 50mm Fixing Holes: 5.0mm (x4)

Metal brace for strengthening corners. Can be used for internal or external corners. Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole. Bright Zinc Plated (BZP) for corrosion resistance. Thickness: 1.8mm Width: 20mm Length: 75mm x 75mm Drill Holes: 5.0mm (x6)

Metal brace for strengthening corners. Can be used for internal or external corners. Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole. Bright Zinc Plated (BZP) for corrosion resistance. Thickness: 2.0mm Width: 24mm Length: 100mm x 100mm Drill Holes: 6.0mm (x6)

Metal brace for strengthening corners. Can be used for internal or external corners. Pre-drilled for use with countersunk screws, countersunk on both sides of fixing hole. Bright Zinc Plated (BZP) for corrosion resistance. Thickness: 2.5mm Width: 24mm Length: 150mm x 150mm Drill Holes: 7.0mm (x6)

The Simpson Strong-Tie EFIXR553, is a light Reinforced Angle Bracket (reinforced in corner). A light, sturdy, versatile metal bracket for a wide range of applications. Galvanised for corrosion resistance. Thickness: 2.0mm Width: 30mm Length: 50mm x 54mm Fixing Holes: 5.0mm (x8), Obround Slot: 6.5mm x 30mm (on 50mm flange) Obround Slot: 8.5mm x 30mm ( on 54mm flange)

The Simpson Strong-Tie EA554, is a light yet sturdy Reinforced Angle Bracket (reinforced in corner). A metal bracket for strengthening corners and connecting a wide range items. Galvanised for corrosion resistance. Thickness: 2.0mm Width: 40mm Length: 53mm x 53mm Fixing Holes: 11.0mm (x2) + 5.0mm (x8)

The Simpson Strong-Tie ABR90 (previously E2/2.5/7090) is a heavy-duty reinforced angle bracket (reinforced in corner) for many applications. Galvanised for corrosion resistance. Measurements (Ref. image 2): A: 90mm B: 90mm C: 65mm Thickness: 2.5mm Fixing Holes: 11.5mm (x2) + 5.0mm (x20)