Fixings & Metalwork

Metal corner plate for strengthening corners. Pre-drilled fixing holes for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance. Thickness: 2.0mm Width: 16mm Length: 75mm x 75mm Fixing Holes: 5.5mm (x4)

Metal corner plate for strengthening corners. Pre-drilled fixing holes for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance. Thickness: 2.0mm Width: 16mm Length: 100mm x 100mm Fixing Holes: 6.0mm (x6)

Steel T-plate suitable for a range of timber frame building uses. Bright Zinc Plated (BZP) for corrosion resistance. Thickness: 2.0mm Overall Width: 75mm x 16mm Overall Length: 75mm x 16mm Fixing Holes: 5.0mm (x5)

Steel T-plate suitable for a range of timber frame building uses. Bright Zinc Plated (BZP) for corrosion resistance. Thickness: 2.0mm Overall Width: 100mm x 19mm Overall Length: 100mm x 19mm Fixing Holes: 6.0mm (x5)

Simpson Strong-Tie NP15/80/140 nail plates can be used in various applications, in particular for jointing or the connection of wood elements in the same plane. Thickness: 1.5mm Width: 40mm Length: 120mm Fixing Holes: 5.0mm (x9)

Simpson Strong-Tie NP15/80/140 nail plates can be used in various applications, in particular for jointing or the connection of wood elements in the same plane. Thickness: 1.5mm Width: 80mm Length: 140mm Fixing Holes: 5.0mm (x25)

A mild steel plate with fixing holes used for strengthening and repairs. Pre-drilled for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance. Thickness: 1.8mm Width: 18mm Length: 75mm Fixing Holes: 5.0mm (x4)

A mild steel plate with fixing holes used for strengthening and repairs. Pre-drilled fixing holes for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance. Thickness: 2.0mm Width: 19mm Length: 100mm Fixing Holes: 5.0mm (x4)

A mild steel plate with fixing holes used for strengthening and repairs. Pre-drilled for use with countersunk screws. Bright Zinc Plated (BZP) for corrosion resistance. Thickness: 2.5mm Width: 26mm Length: 150mm Fixing Holes: 5.0mm (x4)

The Simpson Stong-Tie A34 Framing Anchor is a versatile bracket for many timber framing needs. The speed prong allows you to quickly hold the anchor in place while you get the rest of the fixings in. Galvanised for corrosion resistance. Thickness: 1.0mm Width: 34mm x 39mm Length: 63mm Fixing Holes: 3.5mm (x8)

The Simpson Strong-Tie A35 anchor’s exclusive bending slot allows instant, accurate bending on site for all two and three-way ties. This framing anchor has a speed prong allowing you to quickly hold the anchors in place while you get the rest of the fixings in. Thickness: 1.0mm Width: 36mm x 37mm Length: 113mm Slot in Corner: 41mm Fixing Holes: 3.5mm (x12)

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching. Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching. Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching. Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching. Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.