Fixings & Metalwork

34° collated ring shank nails with an electro galvanised finish. One gas canister is included per 1100 nails, eliminating the need for spare gas. Compatible with most gas powered first fix nails guns, including the Paslode IM350, Paslode PPN35Ci & Hitachi NR90GC.

34° collated ring shank nails with an electro galvanised finish. One gas canister is included per 1100 nails, eliminating the need for spare gas. Compatible with most gas powered first fix nails guns, including the Paslode IM350, Paslode PPN35Ci & Hitachi NR90GC.

34° collated ring shank nails with an electro galvanised finish. One gas canister is included per 1100 nails, eliminating the need for spare gas. Compatible with most gas powered first fix nails guns, including the Paslode IM350, Paslode PPN35Ci & Hitachi NR90GC.

34° collated ring shank nails with an electro galvanised finish. One gas canister is included per 1100 nails, eliminating the need for spare gas. Compatible with most gas powered first fix nails guns, including the Paslode IM350, Paslode PPN35Ci & Hitachi NR90GC.

34° collated ring shank nails with an electro galvanised finish. One gas canister is included per 1100 nails, eliminating the need for spare gas. Compatible with most gas powered first fix nails guns, including the Paslode IM350, Paslode PPN35Ci & Hitachi NR90GC.

Stainless steel nails with a serrated annular ring pattern along the shank; for extra pull-out resistance. This is the correct nail for installing Cedar Shingles. The clout head firmly secures shingles and helps to prevent the nail being over-driven or pulled through the timber by strong winds. 31mm x 1.8mm Stainless Steel Ring Clout Nail 1kg pack = approximately 1500 nails 1kg of nails will install approximately 4 bundles of Cedar Shingles

Stainless steel annular ringshank nails for fixing timber to timber. The threaded shank increases pull out resistance, large head for increased holding power. Nail Length: 38mm Nail gauge: 2.65mm Average nail count = 350 /kg Material: A2 Stainless steel, service class 3 Manufactured to BS 1202-1

Stainless steel annular ringshank nails for fixing timber to timber. The threaded shank increases pull out resistance, large head for increased holding power. Nail Length: 50mm Nail gauge: 2.65mm Average nail count = 410 /kg Material: A2 Stainless steel, service class 3 Manufactured to BS 1202-1

Cut point staples, typically used for attaching wire and netting to timber. Staple length: 20mm Staple gauge: 2.0mm Average staple count = 1079 /kg Finish: Galvanised, service class 3

Cut point staples, typically used for attaching wire and netting to timber. Staple length: 25mm Staple gauge: 2.65mm Average staple count = 486 /kg Finish: Galvanised, service class 3

Cut point staples, typically used for attaching wire and netting to timber. Staple length: 30mm Staple gauge: 3.55mm Average staple count = 260 /kg Finish: Galvanised, service class 3

Cut point staples, typically used for attaching wire and netting to timber. Staple length: 40mm Staple gauge: 4.0mm Average staple count = 136 /kg Finish: Galvanised, service class 3

Square twisted nails; the recommended fixing for installation of joist hangers. Nail length: 30mm Nail gauge: 3.75mm Average nail count = 350 /kg Finish: Sherardised, service class 2

Light-duty nails /pins suited to fixing small decorative components; timber to timber. Small head for flush finish. Pin length: 25mm Pin gauge: 1.6mm Average pin count = 2340 /kg (½ kg bag) Finish: Sherardised, service class 2 Manufactured to BS EN 10230-1

Light-duty nails /pins suited to fixing small decorative components; timber to timber. Small head for flush finish. Pin length: 40mm Pin gauge: 1.6mm Average pin count = 1590 /kg (½ kg bag) Finish: Sherardised, service class 2 Manufactured to BS EN 10230-1