Gates & Gate Fittings

Galvanised for durability, these plain ring latches that can be operated from both sides. Suitable for gates & doors up to 100mm thick (thinner gates will require the spindle to be cut down). Fixings & fitting instructions included.

All fixings included.

All fixings included.

A central closing catch designed to suit the spring gate fastener set. This catch enables the gate to be latched when hung between posts instead of on the back of posts. Galvanised finish for durability. Catch length: 150mm Catch depth: 35mm (max) Fixing holes: two holes - 12mm Ø

RIM LOCK HANDLE

Padlockable gate catch, that stays shut once the striker has gone into the keep. Fixings included.

A galvanised metal bracket set designed to hold a removable, sliding fence rail. Often used as a cheaper alternative to a field gate. A rotating catch is incorporated, this slots into a notch cut into the sliding rail. The catch prevents the rail being accidently removed when animals push against it. Maximum rail size: 50mm x 110mm Fixings included

Spring loaded sliding bolt, ideal for use on gates, garage doors. Fixings included in the pack.

Available in Iroko (hardwood) & softwood, Stafford Gates make an impressive entrance. Iroko is an African hardwood renowned for its durability & stability, the softwood is a slow grown Scandinavian kiln dried softwood. Both should be treated with wood preservative & a treatment of choice. Made to order using a strong, morticed & tenoned construction, Stafford Gates are made to measure up to 9' (2.743m) wide per gate & 8' (2.438m) high. Please notify us if the gates are to be automated as they must be made with a heavy duty bottom rail. The stiles on the Stafford Gate can be made rounded, pointed, sculptured or weathered. They can also be rebated so that the gates close against each other.

The thumb piece passes through the door and raises the latch bar off the keep. All fixings are included.

The thumb piece passes through the door and raises the latch bar off the keep. All fixings are included.

Available in Iroko (hardwood) & softwood, Swept Top Manor Gates make an impressive entrance. Iroko is an African hardwood renowned for its durability & stability, the softwood is a slow grown Scandinavian kiln dried softwood. Both should be treated with wood preservative & a treatment of choice. Made to order using a strong, morticed & tenoned construction, Swept Top Manor Gates are made to measure up to 9' (2.743m) wide per gate & 8' (2.438m) high. Please notify us if the gates are to be automated as they must be made with a heavy duty bottom rail. The stiles on the Swept Top Manor Gates can be made rounded, pointed, sculptured or weathered. They can also be rebated so that the gates close against each other.

Light duty catch, popular for use in animal housing.

Heavy-duty galvanised hinge set for hanging a 75mm thick wooden field gate. The adjustable bottom gate fitting allows the gate to be easily levelled, this is useful if the gate or posts drop over time. Set includes: 1x 450mm (18") double strap top band 1x Adjustable bottom gate fitting 1x 19mm hook to drive 1x 19mm hook to bolt All necessary fixings Galvanised finish

Heavy-duty galvanised hinge set for hanging a 75mm thick wooden field gate. The adjustable bottom gate fitting allows the gate to be easily levelled, this is useful if the gate or posts drop over time. Set includes: 1x 600mm (24") double strap top band 1x Adjustable bottom gate fitting 1x 19mm hook to drive 1x 19mm hook to bolt All necessary fixings Galvanised finish