Handles, Catches & Latches

Once fitted these return springs ensure that the gate returns to the closed position. Fixings & instructions included in the pack.

Light cabin hooks with all fixings included. Used for holding gates / doors open.

Throw Over Gate Loops are used to secure a pair of wooden five bar gates in the middle when in the closed position. The galvanised gate loop is fitted to the top rail of the closing gate with the included carriage bolt, for best results; drop bolts should also be fitted to secure the bottom of both gates (sold separately). Overall Length: 350mm Maximum Top Rail Width: 75mm Minimum Top Rail Depth: 75mm Galvanised finish Carriage bolt included

A Throw Over Gate Loop with lifting handle is used to secure a pair of wooden five bar gates in the middle when in the closed position. The galvanised gate loop is fitted to the top rail of the closing gate with the included carriage bolt. For best results; drop bolts should also be fitted to secure the bottom of both gates (sold separately). Overall Length: 350mm Maximum Top Rail Width: 75mm Minimum Top Rail Depth: 75mm Galvanised finish Carriage bolt included

The New Zealand (NZ) Gate Fastener is a basic form of gate catch, typically used to secure field gates. The heavy-duty fastener hook has a spring loaded catch to prevent accidental opening. For extra security a padlock (not included) could be attached through the chain. Galvanised finish. Staple: Diameter: 8mm Length: 65mm Width: 45mm Chain: Length: 420mm Links: 6mm diameter x 25mm x 30mm Fastener: Length: 100mm Diameter: 12mm

ANVIL 33122: GOTHIC HOOK - BEES WAX

Padlockable gate catch, ideal for smaller gates such as the Hampton gate or picket style gates. Once the striker has closed into the keep it stays shut. All fixings included in the pack.

Padlockable gate catch, ideal for smaller gates such as the Hampton gate or picket style gates. Once the striker has closed into the keep it stays shut. All fixings included in the pack.

A Cranked Striker is designed to be fitted to the swinging end of a wooden five bar gate. It connects into a self-locking gate catch (fitted to the gate post). The striker is bolted though the wooden gate stile, the built-in spiked washer ensures a secure fit. Overall Length: 200mm Diameter: 12mm Galvanised Finish

DOUBLE LEGGED STRIKER

This galvanised set includes: spring fastener, staple catch, keep & all required fixings.

Once fitted these return springs ensure that the gate returns to the closed position. Fixings & instructions included in the pack.

Gravity catch to fit a 75 x 75mm wooden post (*post not included). This galvanised gravity catch is designed to hold a wooden five bar gate in the open position. The catch works by retaining the bottom rail of the gate when it's pushed open, metal plates are included to protect the gate rail from damage through use. The weighted design allows the catch work automatically and is foot operated to release the gate. Set includes: - The gate catch - Two metal rail protection plates - One metal plate to fit around post mortice Post & fixings sold separately

A galvanised, spring-loaded gate wheel, that provides additional support for heavy gates. Heavy-duty construction with dense rubber wheel. A removeable split-pin allows the wheel direction to be rotated 90°, enabling various fitting positions. Dimensions: Overall Length: 375mm Wheel Diameter: 100mm Fixing Plate: 40 x 170mm Fixing Bolts: M10 x 120mm; two included

This padlockable variation of the self locking gate catch is specifically designed for horse riders, allowing operation of a gate without the need to dismount. Cranked leg striker and fixings included.