M12 X 220mm CARRIAGE BOLT (+ HEX NUT)

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence. Feather-edge can also be fitted horizontally as a budget cladding. - 125mm Board Width - 10 boards needed per linear metre (25mm overlap) - Cut from 22 x 125mm - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge - Homegrown Spruce - Sawn finish - Pressure treated green

A heavy steel washer, for general use with bolts and threaded bar (studding). BZP (Bright Zinc Plate) finish. Dimensions: 2mm x 24mm Diameter 11mm Bolt Hole: To suit M10 thread

Hex nut with metric thread, for general use with bolts and threaded bar (studding). BZP (Bright Zinc Plate) finish. Thread: 10mm - Metric Depth: 8mm Spanner Size: 17mm

Carriage Bolt; cup square hex, 23mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber. Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened. Supplied with one standard hex nut, washers sold separately.

A large heavy steel washer, for general use with bolts and threaded bar (studding). BZP (Bright Zinc Plate) finish. Dimensions: 3mm x 40mm x 40mm 13mm Bolt Hole: To suit M12 thread

A heavy steel washer, for general use with bolts and threaded bar (studding). BZP (Bright Zinc Plate) finish. Dimensions: 2mm x 28mm Diameter 13mm Bolt Hole: To suit M12 thread