M20 SQUARE PLATE WASHER

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence. Feather-edge can also be fitted horizontally as a budget cladding. - 125mm Board Width - 10 boards needed per linear metre (25mm overlap) - Cut from 22 x 125mm - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge - Homegrown Spruce - Sawn finish - Pressure treated green

Hex nut with metric thread, for general use with bolts and threaded bar (studding). BZP (Bright Zinc Plate) finish. Thread: 20mm - Metric Depth: 15mm Spanner Size: 30mm

Graded to meet BS5534 standards, this batten is used in the building trade for roofing projects. - Stained Blue*, for grade identification purposes - Fine-sawn finish - Pressure treated - Complies with BS5534 *If blue batten is not available we occasionally have gold batten which meets the same standard

CLS (Canadian Lumber Standard), a general purpose, non-structural grade, untreated building timber. Typically used for internal first fix applications, E.g. non-structural framing & stud walls. - Machined from 50 x 100mm, finished size approx. 38 x 89mm - Smooth regularised finish - Grade C16 - Untreated softwood

Treated carcassing timber for all of your general outdoor projects. - Machined from 47 x 125mm, finished size approx. 45 x 120mm - Smooth regularised finish - Grade C24 - Good quality, slow grown softwood - Pressure treated green

Mild steel threaded bar / studding. - M20 (metric 20mm) thread diameter - 1.0m length - Mild steel grade 4.6 - Bright Zinc Plated finish (BZP) - Nuts & washers sold separately