M8 X 100mm CARRIAGE BOLT (+ HEX NUT)

A heavy steel washer, for general use with bolts and threaded bar (studding). BZP (Bright Zinc Plate) finish. Dimensions: 1.5mm x 21mm Diameter 9mm Bolt Hole: To suit M8 thread

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for 47mm wide timber - Width: 146.4mm (including fixing wings) - Length: 236.5mm - Depth: 52.1mm

Timber batten is a general purpose building material that has many uses for trade and DIY. - Fine-sawn finish - Pressure treated green

Carriage Bolt; cup square hex, 20mm mushroom head, BZP finish (Bright Zinc Plate). Designed for bolting through timber. Square hex refers to the square section attached to the mushroom head, this sinks into timber and stops the bolt from spinning when the nut is tightened. Supplied with one standard hex nut, washers sold separately.

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence. Feather-edge can also be fitted horizontally as a budget cladding. - 125mm Board Width - 10 boards needed per linear metre (25mm overlap) - Cut from 22 x 125mm - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge - Homegrown Spruce - Sawn finish - Pressure treated green

Treated timber carcassing for general building projects. - Machined from 47 x 100mm, finished size approx. 45 x 95mm - Smooth regularised finish - Grade C24 - Good quality, slow grown softwood - Pressure treated green