PZ1 x 25mm (PK 10) IRWIN POZI SCREWDRIVER BITS

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence. Feather-edge can also be fitted horizontally as a budget cladding. - 125mm Board Width - 10 boards needed per linear metre (25mm overlap) - Cut from 22 x 125mm - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge - Homegrown Spruce - Sawn finish - Pressure treated green

Galvanised steel bracket for attaching 75mm triangular Arris Rail to square posts or wall plates. Minimum post/wall plate width is 45mm. Angle: 62 x 62mm (suits 75mm Arris Rail) Wings: 42 x 155mm (overall width) Length: 285mm Fixing Holes: (10x) 5mm diameter + (2x) 27mm x 6mm slots

Arris rail is a triangular shaped fencing rail for use with feather edge fencing. This rail is designed to fit into notched posts or can be attached to standard posts with an arris rail bracket. Arris rail can also be used (under felt) around the edges of flat roofing, or as corner reinorcement when building wooden crates etc. - Cut from 75 x 75mm (Square) - Rail Dimensions: 74 x 74mm x 3.0m, 105mm on longest edge - Sawn Finish - Homegrown Softwood, locally produced in the UK - Pressure Treated - Green

Timber posts with three 'V' notches for arris rails: designed to be used with 1.65m feather-edge boarding. Pressure treatment, incised, UC4. - 100 x 125mm Timber Post - 3 Triangular 'V'-notches to suit arris rail - The notches are spaced to suit 1.65m Feather-edge + 150mm Gravel Board - more details in full description below - Homegrown softwood, locally produced in the UK - Sawn finish - Incised at the bottom of the post for improved treatment penetration - UC4 Pressure Treatment - Green

Enhance your Feather Edge fence with our Rebated Fence Capping, crafted from premium Scandinavian Redwood. Providing both a quality finishing touch and additional protection, this capping is pressure treated green for longevity. See full product description below.

A concrete post for building raised decking; a heavy duty, durable alternative to timber posts. Raise the decking framework out of ground contact to increase the life and durability of timber components by eliminating absorption of ground moisture. The air gap beneath raised decking creates ventilation which allows timber components to fully dry (weather permitting), which helps to prevent fungus growth and rot. The posts are notched for joists to sit on, there is also a 12mm bolt hole to secure the joist in place. Dimensions: 100 x 100 x 900mm Notch Dimensions: 45 x 83mm, 12mm bolt hole in middle