GATEMATE SIDE GATE FIXING KIT - BLACK (INCLUDES PAIR OF T-HINGES, BRENTON BOLT & RING LATCH)

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence. Feather-edge can also be fitted horizontally as a budget cladding. - 125mm Board Width - 10 boards needed per linear metre (25mm overlap) - Cut from 22 x 125mm - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge - Homegrown Spruce - Sawn finish - Pressure treated green

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence. Feather-edge can also be fitted horizontally as a budget cladding. - 125mm Board Width - 10 boards needed per linear metre (25mm overlap) - Cut from 22 x 125mm - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge - Homegrown Spruce - Sawn finish - Pressure treated green

A self-tapping Masonry Screw for brick and concrete, a popular fixing to fit window frames. An easy to use fixing that does not require plastic plugs, it has a high resistance to fire compared to nylon fixings. This screw is a friction fixing which minimises expansion stress in the base material, this allows fixing near to the edge, and gives greater loading performance than most nylon fixings. To use: pre-drill a 6mm pilot hole, use a drill or impact driver fitted with T30 bit to drive the screw in. T30 bit and white cover caps included when bought in box quantities of 100. Drill Bit Dia. - 6mm Min. Embed Depth - 45mm Head Type - T30 Torx Driver Type - Drill / Impact Driver

Rapid setting post hole concrete, suitable for fixing all types of wooden, metal and concrete posts. Post Mix is a pre-blended, quick setting concrete mix, which sets in approximately 10 minutes after mixing with water (depending on ambient temperature). Simply half fill the hole with water, then pour the post mix in. Fencing contractors typically allow 1½ to 2 bags per fence post (this varies depending on the hole and post size). We offer 33% discount on post-mix when you pay & collect in store!

125mm Feather Edge Boards are tapered boards that are vertically lapped to form a solid fence. Feather-edge can also be fitted horizontally as a budget cladding. - 125mm Board Width - 10 boards needed per linear metre (25mm overlap) - Cut from 22 x 125mm - Finished size approx. 12mm on thick edge tapering to 6mm on thin edge - Homegrown Spruce - Sawn finish - Pressure treated green

A sturdy yet affordable Overlap Panel which is built to last. - 6' wide x 6' high (1829mm wide x 1829mm high) - Fully pressure treated panels - Nailed construction - Waney-edge, horizontal, sawn-finish slats - Five vertical battens one side and three vertical battens on the other side (approx. 16 x 38mm) - Framed top and bottom on one side (approx. 18 x 50mm) - Finished and protected with a top capping strip - Manufactured in the U.K.