Simpson Strong-Tie

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching. Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.

Pre-galvanised twisted restraint straps, designed to building regulations for vertical restraint. Strap thickness: 2mm Strap width: 28mm Strap total length: 1000mm Distance from top of strap to top of twist: 100mm 6mm holes along the length of the strap

For vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls.

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching. Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching. Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

Galvanised fixing band FB20A has many building & DIY uses. - Flexible galvanised steel can be easily shaped by hand - 1mm thick - 20mm Wide - 10m Coil - Includes three hole options to suit a variety of fixings

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for double 45mm joists - Width: 189mm (including fixing wings) - Height: 234mm - Depth: 52mm

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for 47mm wide timber - Width: 146.4mm (including fixing wings) - Length: 236.5mm - Depth: 52.1mm

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for 75mm wide timber - Width - 169mm (including fixing wings) - Height - 247mm - Depth - 55mm

Square twisted nails; the recommended fixing for installation of joist hangers. Nail length: 30mm Nail gauge: 3.75mm Average nail count = 350 /kg Finish: Sherardised, service class 2

Simpson Strong-Tie NP15/80/140 nail plates can be used in various applications, in particular for jointing or the connection of wood elements in the same plane. Thickness: 1.5mm Width: 40mm Length: 120mm Fixing Holes: 5.0mm (x9)

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for 150mm wide timber - Width - 287mm (including fixing wings) - Height - 440mm - Depth - 55mm

Galvanised joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for 47mm wide timber - Width - 145mm (including fixing wings) - Length - 480mm - Depth - 65mm

Galvanised mini joist hanger for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for hanging 47mm wide timber - Width - 115mm (including fixing wings) - Length - 62mm - Depth - 48mm Install using 3.75 x 30mm square twist nails: 16 nail holes / hanger 1 kg square twist nails installs 21 hangers

The RR ridge rafter connector provides alignment control and correct nailing locations. The RR47 may be used with any rafter slope up to 30°. Galvanised for corrosion resistance. For back-to-back installations, the minimum width of the ridge plate is 38mm. Secure in place using 3.75 x 30mm square twisted nails. Measurements (Ref. image 3): A: 47mm B: 83mm C: 33mm D: 114mm t (Thickness): 1.2mm Fixing Holes: Header: 4mm (x4) Joist: 4mm (x4) Nationwide delivery is available on this product, call 0117 967 4382 for details or submit a contact form below.

Galvanised Truss Clip for constructing timber to timber framework. Precision formed and engineered for fast installation and maximum loads. - Suitable for securing 47mm wide timber - Overall Width - 105mm (including fixing wings) - Length - 100mm Install using 3.75 x 30mm square twist nails 12 nail holes / truss clip 1kg square twist nails installs approx. 29 truss clips

The HES (heavy engineered strap) replaces traditional heavy restraint straps in roof and floor construction. Reducing the thickness to 1.5mm allows the HES strap to span over the top of floor joists and the bottom chords of trusses without the need for notching. Complient with BS EN 845-1, Simpson Strongtie heavy engineered restraint straps are less than 40% of the weight, quicker to fit and overcome many fixing problems associated with traditional heavy straps.

Simpson Strong-Tie NP15/80/140 nail plates can be used in various applications, in particular for jointing or the connection of wood elements in the same plane. Thickness: 1.5mm Width: 80mm Length: 140mm Fixing Holes: 5.0mm (x25)

A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. The height/level of the square support plate can easily be adjusted after installation which is useful when building structures on uneven ground. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts. - Dichromate coated galvanised mild steel - Height Adjustable: 100mm→150mm - Threaded Core: 20mm diameter - Top plate: 100 x 100mm x 5mm - Base plate: 130 x 130mm x 5mm - 12mm fixing holes

The Simpson Strong-Tie EFIXR553, is a light Reinforced Angle Bracket (reinforced in corner). A light, sturdy, versatile metal bracket for a wide range of applications. Galvanised for corrosion resistance. Thickness: 2.0mm Width: 30mm Length: 50mm x 54mm Fixing Holes: 5.0mm (x8), Obround Slot: 6.5mm x 30mm (on 50mm flange) Obround Slot: 8.5mm x 30mm ( on 54mm flange)

A quality Post Base made by Simpson Strong-Tie. Used to raise timber posts and timber framework above ground level, which prevents rotting caused by moisture from ground contact. Suitable for structurally supported timber posts and framework that need to last a long time e.g. for a basic timber porch or decking framework. Not recommended for free standing posts e.g. fence posts. - Steel S235JR according to NF EN 10025 - Hot-dip galvanized according to NF EN ISO 1461 - Total Height - 100mm - Tubular Core - 48mm diameter - Top plate - 100 x 100mm x 4mm - Base plate - 130 x 130mm x 4mm - Maximum post cross section - 200 x 200mm - 11.0mm fixing holes (x8)

The Simpson Stong-Tie A34 Framing Anchor is a versatile bracket for many timber framing needs. The speed prong allows you to quickly hold the anchor in place while you get the rest of the fixings in. Galvanised for corrosion resistance. Thickness: 1.0mm Width: 34mm x 39mm Length: 63mm Fixing Holes: 3.5mm (x8)

The Simpson Strong-Tie A35 anchor’s exclusive bending slot allows instant, accurate bending on site for all two and three-way ties. This framing anchor has a speed prong allowing you to quickly hold the anchors in place while you get the rest of the fixings in. Thickness: 1.0mm Width: 36mm x 37mm Length: 113mm Slot in Corner: 41mm Fixing Holes: 3.5mm (x12)

The Simpson Strong-Tie ABR90 (previously E2/2.5/7090) is a heavy-duty reinforced angle bracket (reinforced in corner) for many applications. Galvanised for corrosion resistance. Measurements (Ref. image 2): A: 90mm B: 90mm C: 65mm Thickness: 2.5mm Fixing Holes: 11.5mm (x2) + 5.0mm (x20)