Tools, Safety & Workwear

- Waterproof, shrinkproof, UV protected and rotproof tarpaulin with reinforced rope hems and rust proof aluminium eyelets - For temporary roof protection, to act as a ground sheet or as a general utility cover - Cut size is 2.7 x 3.5m, finished size is approx 2.55 x 3.4m

The BlueSpot Bungee Cords have a heavy-duty elastic design provides constant tension and a firm hold. Offering quick, convenient load binding with non-marring high strength hooks to eliminate knots. 12mm (1/2in) diameter provides maximum holding power and is ideal for tarpaulins, cars, trucks, trailers, bikes and motorcycles.

*Brand may vary AdBlue is required by some diesel vehicles to reduce Nitrous Oxide (NOx) emissions. - Ready to use solution - 10 litre container - Includes pouring spout - Conforms to ISO22241-1

These wedges are designed for use in conjunction with the correct wooden handle when replacing damaged handles on hammers, axes and other striking tools. Includes malleable steel hammer wedges and wooden wedges and when fitted correctly, they provide a secure and safe attachment of a striking head to a wooden handle. Kit consists of 2 Steel Wedges : 12mm Width (Size 1) 1 Wooden Wedge : 17 x 25mm Suitable for head weights 4oz to 1lb 2 Steel Wedges : 15mm Width (size 2) 1 Wooden Wedge : 25 x 35mm Suitable for head weights 1lb to 2.5lbs 2 Steel Wedges : 18mm width (size 3) 1 Wooden wedge : 30 x 30mm Suitable for head weights 3lb to 7lbs 2 steel wedges : 21mm width (size 4) 1 wooden wedge : 30 x 40mm Suitable for head weights 10lb to 28lbs Note Hammer wedges are NOT suitable for use with fibreglass replacement handles.

The Bahco 59/S54BC Colour Coded Bit Set contains a wide selection of bits suitable for universal use. Each bit is made from high-performance alloy steel. Supplied in a durable carry case. Contains: 8 x 25mm Phillips Bits: PH1, PH2(x4), PH3 and PH2G(x2) 6 x 25mm Pozidriv Bits: PZ1, PZ2(x4) and PZ3 2 x 25mm Slotted Bits: 4.5 and 5.5mm 16 x 25mm TORX® Bits: TX10(x2), TX15(x2), TX20(x4), TX25(x2), TX27, TX30(x4) and TX40 5 x 25mm TORX® Tamper-proof Bits: TTX10, TTX15, TTX20, TTX25 and TTX30 5 x 25mm Hexagon Bits: 3, 4, 5, 6 and 8mm 2 x 25mm Robertson (Square) Bits: #1 and #2 2 x 125mm Phillips Bits: PH1 and PH2 2 x 125mm Pozidriv Bits: PZ1 and PZ2 3 x 150mm TORX® Bits: TX20, TX25 and TX30 1 x Magnetic Universal Bit Holder 1 x Magnetic Quick-Release Bit Holder 1 x Socket Adaptor 1/4in

The Bahco Standard Hand Axe for DIY and hobby use. Very much an all round general-purpose axe with a thin wide blade for a clean cut. Curved ash handle, secured by a jagged carbon-fibre wedge. Suspension hole for easy storage when not in use. YOU MUST BE OVER THE AGE OF 18 TO PURCHASE THIS PRODUCT

Hard lead pencil - sold loose

The BlueSpot ratchet cargo strap has a ratchet action which quickly tightens belt to the load. 15ft x 1in strap, 2 plastic coated hooked ends. Rated loading capacity: 90kg Maximum loaded capacity: 180kg.

A general purpose trimming knife. - Blade adjustable to four positions - Spare blades can be stored in the handle - Will fit most brands of replacement knife blades - Heavy-duty knife blade included - Designed with safety in mind YOU MUST BE OVER THE AGE OF 18 TO PURCHASE THIS PRODUCT

The Bollé Safety CONTOUR Safety Glasses have a solid, comfortable and lightweight design. The frames have non-slip TIPGRIP temples and a non-slip nose bridge. These Bollé Safety CONTOUR Safety Glasses have clear lenses. Approved for permanent wear and certified with perfect optical quality with anti-fog and anti-scratch coatings, 99.9% UVA/UVB protection. Specification Lens Type: Clear, Anti-Fog and Anti-scratch. Lens Conforms to: EN1661F/EN170-UV 2C-1.2. Frame Conforms to: EN166FT.

The Bollé Safety CONTOUR Safety Glasses have a solid, comfortable and lightweight design. The frames have non-slip TIPGRIP temples and a non-slip nose bridge. These Bollé Safety CONTOUR Safety Glasses have smoke colour lenses. They are approved for permanent wear and certified with perfect optical quality. Designed and used for protection against UVA/UVB and solar radiation, 99.9% UVA/UVB protection. Specification Lens Type: Smoke, Anti-Fog and Anti-scratch. Lens Conforms to: EN1661F/EN172-Solar 5-2.5. Frame Conforms to: EN166FT.

Faithfull Brass Scratch Brush. Ideal for preparatory work such as removing rust, scale, old paintwork and grouting. Brass wire is also spark-free which makes them particularly useful in fire or explosion prone environments. The handle is made from durable beech wood and has been drilled for hanging, making it easy to store and access whenever you need it.

The OX Pro Carpenter’s Square and Angle Indicator allows accurate, certified 90° measurement. Its stainless steel rule is permanently etched with 22.5°, 45° , 67.5° and 90° and the high-impact polymer handle features a unique support ledge which balances the square for one handed marking.

High quality manual applicator gun, to fit 310 and 400ml cartridges. Suitable for acrylics, silicones, MS polymers, Exocet resin and adhesives.

The BlueSpot Combination Square is specially designed for use in wood and metalworking. Features a hardened and tempered blade for extra durability with metric and imperial graduations. Spirit level and scriber included in square head handle. Locating screws on all heads ensure quick and easy assembly.